Description
Newest Generation Heart Beat Detector
- High performance Detection
- Easy to use
- Efficient
The MDS system has been developed to detect hidden human beings in vehicles and/or in their load. It detects any movement generated by a hidden human being. The MDS collects the movements with seismic sensors and analyses the data using an advanced signal processing algorithm.
The control is carried out by special sensors, which are placed on the vehicle and which transmit the measured data to the MDS main unit. The collection and evaluation of the data requires less than 30 seconds. For a complete check, it usually takes less than 2 minutes – including handling (placing and removing) of the sensors.
Lorries are mostly sealed, which makes it very difficult to check their cargo. Because of legal reasons, the authorities are not allowed to open up a sealing if the lorry driver’s documents are complete. Besides the fact that it is legally not permitted, the process of opening up a sealing would be very time consuming.
This way, it is possible for hidden stowaways or illegal immigrants to enter a country without getting noticed.
Other methods, such as CO2 tests or X-rays, are not always suitable or can be easily bypassed.
With our simple method called MDS or “the newest generation human detector “, any type of lorry can be inspected for hidden stowaways with an almost 100% precision. This makes it possible to control lorries in ports and border-crossings, or just along the road. With this system, illegal immigrants can be detected and smugglers deprived of their most important supply route.
TECHNICAL CHARACTERISTICS | MDS III pro V 8.0 – Portable | |
DIMENSION | Size | 800 x 600 x 410 mm (L x W x H) |
Weight
|
app. 40 kg
incl. all parts stored in the flight case |
|
FIGURES | Voltage support
|
runs on Battery power
can also run on AC 110 .. 240 VAC / 50/60Hz |
Usage cycle | 24/7 | |
Operating temperature | – 25°C to 40°C | |
Storage temperature | -25°C to 40°C | |
Relative humidity | up to 95% non-condensing | |
Wind speed: | 35 km/h | |
Ground vibration | 0.4 m/s | |
SENSORS | Magnetic sensors | 4 pcs. |
Ground sensor | 1 pcs. | |
Low-frequency microphone | 1 pcs. | |
Tripod | 1 pcs. | |
Spare sensors | 2 pcs. | |
CABLES | Cable reels | 4 pcs |
Total length with sensor attached | 15 meters | |
Oil resistant | twistable: -35°C to 80°C | |
Cable | PUR | |
OPERATING UNIT | Laptop | Ruggedized Laptop Getac B360
with 13.3” Touch screen |
Software:
|
MDS Detection-Software pro V 8.0
and Windows 11 professional |
|
Language support | Available in English, German, French, etc.
Languages
|
|
SPECIAL OPERATION POSSIBILITIES | Full check:
|
using all 4 sensors to measure trailers,
heavy trucks or coaches, all with 2, 3 or 4 axis |
Small check:
|
using 2 sensors for the vehicle
(light trucks or vans) |
|
4 car check:
|
using 1 sensor for each car.
Controlling 4 cars simultaneous |
|
ADDITIONAL ACCSESSORIES | 12 V DC, power supply ensuring 24/7 operation using the car charger | |
Carrying case for the laptop | ||
Spare seismic sensor – 2 pieces |